 |
12V DC-DC LiFePO4 Lithium-ion Battery RV Charging Controller
جزئیات محصول:
| محل منبع: | شنژن |
| نام تجاری: | Oxiang /OEM |
| گواهی: | CE.RoHS,FCC |
| شماره مدل: | B2B1290 |
پرداخت:
| مقدار حداقل تعداد سفارش: | 1 عدد |
|---|---|
| قیمت: | Negotiate |
| جزئیات بسته بندی: | جعبه هدیه |
| زمان تحویل: | نمونه: حدود 3-5 روز کاری پس از پرداخت |
| شرایط پرداخت: | T/T، Western Union، Paypal، کارت اعتباری |
| قابلیت ارائه: | 10000 عدد در ماه |
|
اطلاعات تکمیلی |
|||
| سازگاری با نوع باتری: | سرب اسید، AGM، ژل، لیتیوم | نوع: | MPPT |
|---|---|---|---|
| ولتاژ خروجی: | DC 12 ولت / 24 ولت | توان خروجی: | 500 وات |
| دمای عملیاتی: | -10 تا 50 درجه سانتی گراد | ولتاژ: | 12-50 ولت |
| Pvmax: | 685 وات | حداکثر توان DC: | 390 وات |
| تابع: | APP Control | یخچال: | 20A |
| شارژر: | شارژر باتری خورشیدی | سوکت استاندارد: | اتحادیه اروپا / اتحادیه اروپا / انگلستان / ایالات متحده |
| دمای عملیاتی: | -20-50 | گواهینامه ها: | CE، RoHS |
| ولت: | 12 ولت | ||
| برجسته کردن: | 12V LiFePO4 battery charger,RV DC-DC charging controller,lithium-ion battery charging controller |
||
توضیحات محصول
INSTALLATION ATTENTION
• Do not expose the DC/DC charge tr o rain or snow.
• Do not use the DC/DC charger if it has received a sharp blow, been dropped,
has cracks or openings in the case, or is damaged in any other way.
• Do not install the charger near a heat source.
• This charger should not be installed in an airtight or poorly ventilated area.
• Do not attempt to open the DC/DC charger. There are no user serviceable parts
except for user replaceable fuses.
• Do not use the DC/DC charger with damaged cables.
• It is strictly forbidden to disassemble the charger and/or modify the housing in
any way.
CONNECTIONS ATTENTION
• It is important to choose the correct battery type, a wrong choice can cause irreversible
damage, The LITHIUM charging cycle is only compatible with LiFePo4 batteries with
integrated BMS (Battery Management System).
Maintenance
• If necessary, the fuses must be replaced by identical products.
• This charger cannot be disassembled and the electronic board is inaccessible.
• Therefore, with the exception of the fuses, all on-site maintenance is prohibited.
• Disconnect the DC power supply before servicing, cleaning or working on
circuits connected to the DC/DC booster.
• Once disconnected, isolate the battery connection terminals.
• It is important to ensure that the area around the battery is well ventilated.
• It is important to ensure that the battery voltage matches the output voltage
• Always use ungrounded batteries. If necessary, the battery grounding connection
should be made last.
To prevent overheating, make sure the connections are properly tightened
می خواهید اطلاعات بیشتری در مورد این محصول بدانید